Bankoi WebHost Panel ADMINISTRATOR MANUAL

RedHat Linux 9

It is implied that Red Hat® Linux 9 is already installed on your system.

  1. Log in

    Log in as root to your system.

  2. Prerequisites

    Make sure that all the required libraries are installed. Refer to section Package requirements of chapter Preparing To Install Bankoi WebHost Panel for the list of required libraries.

    1. You can check whether a particular rpm is already installed by entering the following command: rpm -q 'rpmname'. For example:

      bash$ rpm -q pam

      pam-0.74-22

    2. If some rpm’s are missing, you can install the rpm's of indicated versions or higher from the RedHat 9 disc or you can obtain them at ftp://updates.redhat.com/9/en/. For installation use the following command: rpm -Uvh 'rpm_name'.rpm

      NOTE

      You can use Bankoi WebHost Panel Autoinstaller to simplify installation of Bankoi WebHost Panel and all required RPMs.

      IMPORTANT

      Pay attention to the options used. Utilizing -U instead of -i will help you avoid some problems during Bankoi WebHost Panel installation.

       

    3. If prior to installing Bankoi WebHost Panel you have already installed and configured MySQL, you need to perform one of the following:
      • set the empty password for the MySQL root user, or
      • create the user admin with password setup and 'root' privileges

       

  3. Base installation

    Install the following base Bankoi WebHost Panel rpm's from the directory 'base' in your Bankoi WebHost Panel archive or from the "Downloads" section at http://www.Bankoi WebHost Panel.com/

    • courier-imap-1.7.0-30psa.rh9.i586.rpm
    • psa-6.0.0-rh9.build030422.02.i586.rpm
    • psa-courier-imap-add-6.0.0-rh9.build030422.02.i586.rpm
    • psa-locale-6.0.0-rh9.build030422.02.noarch.rpm
    • psa-logrotate-3.6.6-1.rh9.i586.rpm
    • psa-proftpd-1.2.7rel-rh9.build030422.02.i586.rpm
    • psa-proftpd-xinetd-1.2.7rel-rh9.build030422.02.i586.rpm
    • psa-qmail-1.03-rh9.build030422.02.i586.rpm

    For installation use the following command: rpm -Uvh 'rpm_name'.rpm

  4. Additional

    In order to enable Bankoi WebHost Panel provide additional functionality you can install a number of additional packages.

    NOTE

    These packages are not required for Bankoi WebHost Panel to function properly.

     

    1. If you plan to use server-wide SPAM protection, you should install following rpm from the 'opt/mail' directory

      psa-qmail-rblsmtpd-0.70-rh9.build030422.02.i586.rpm

    2. In order for your Apache to support FrontPage extensions and Apache::ASP it is necessary to install rpm's from the directories 'opt/fp' and 'opt/perl' respectively in your Bankoi WebHost Panel archive, or from the "Downloads" section at http://www.Bankoi WebHost Panel.com/
    3. In order for your server to support JSP and Java Servlet it is necessary to install following rpms from the 'opt/java' and 'Third_Party' directories
      • mod_webapp-4.1.18-1psa.rh9.i586.rpm
      • psa-tomcat-configurator-6.0.0-rh9.build030422.02.noarch.rpm
      • j2sdk-1_4_1_01-fcs-linux-i586.rpm
      • tomcat4-4.1.18-full.1jpp.noarch.rpm
      • tomcat4-admin-webapps-4.1.18-full.1jpp.noarch.rpm
      • tomcat4-webapps-4.1.18-full.1jpp.noarch.rpm

       

    4. If you plan to use PostgreSQL RDBMS, you should install the rpm's of indicated versions or higher from the RedHat 9 disc or you can obtain them at ftp://updates.redhat.com/9/en/.
      • postgresql-7.3.2-3.i386.rpm
      • postgresql-server-7.3.2-3.i386.rpm
      • postgresql-libs-7.3.2-3.i386.rpm

       

  5. Completion

    When the installation is finished, Bankoi WebHost Panel will have started automatically. In order to complete the Bankoi WebHost Panel initial configuration, you need to login to Bankoi WebHost Panel on your host at https://machine.domain.name:8443/ or https://IP-Address:8443/

    IMPORTANT

    The default username is admin and the default password is setup. Both are case sensitive. For security reasons this password should be changed upon initial login.

    NOTE

    Bankoi WebHost Panel cannot enable user quotas on XFS partition during installation because such operation requires remount of XFS partition. In order to enable hard disk quotas on XFS partition you should manually remount it with usrquota option (additional information can be found on 'quotaon' man page).

Initial configuration

When you login to the Bankoi WebHost Panel control panel for the first time, you are taken to the post-installation configuration page, where you are prompted to supply the following information:

  1. Select the shared IP addresses list displays the whole range of IP addresses in the pool. You need to select the addresses that will be used as shared for name based hosting accounts.
  2. Specify the full hostname in the appropriate field.
  3. To change the default administrator's password, type it in the Administrator's password input field, and confirm in the field below.

Click UPDATE button to complete the initial configuration.
 

                        
English Services:   Domains Registration | Web Hosting Support | DNS Servers Support | Helpdesk Software | Linux Support | Webmasters Support  | Scripts Support | Backup Support | Application Installation | SYS Admin Outtasking | 24x7 Web Hosting Support | Development Support | Security Outtasking | Backup Outtasking | Monitoring & Reporting Outtasking | SMS Support | Support Forums | Bankoi WebHost Panel | Live Support solution | Hosting automation solution
Servicios en español:  

Servidores Dedicados | Servidores Dns | Servidores Backup | Servidores Linux | Servidores Web | Servidores Juegos | Registro de dominios | Aplicaciones Web | Housing | Servicios SMS | Alta en buscadores | Helpdesk Software | Bankoi WebHost Panel | Servidor de Banners | Soporte Helpdesk de Software | Servidores de correo | Desarrollo Web

Developed by Bankoi - (c) 1999 - 2005 - All rights reserved - Terms of use - Webmaster